RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050284 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75793 1.INSTALL FRONT DOOR OUTSIDE MOULDING UPPER PAD

HINT:

When installing the front door outside moulding upper pad, heat the front door outside moulding using a heat light.


Standard:
Item Temperature
Front Door Outside Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the front door outside moulding excessively.


a.

When using a new front door outside moulding:

i.

Clean the surface of a new front door outside moulding.


ii.

Using a heat light, heat the front door outside moulding surface.



b.

When reusing the front door outside moulding:

i.

Using a heat light, heat the front door outside moulding surface.


ii.

Remove the double-sided tape from the front door outside moulding.


iii.

Wipe off any tape adhesive residue with cleaner.



c.
B340228

Install a new front door outside moulding upper pad.

i.

Using a heat light, heat the front door outside moulding.


ii.

Remove the peeling paper from the face of the front door outside moulding upper pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the front door outside moulding upper pad as shown in the illustration.